[Elecraft] Remote control software

[Rich McCabe]

Well actually, you CANT control the volume on a K2 :)

As far as setting filters. Callsign Software has full DSP control via the
interface. Not only that it reads the filter values and labels the buttons.

Rich

----- Original Message ----- 
From: "Charles Greene" <crgreene at cox.net>
To: "G8IFF/KC8NHF" <nigel at ngunn.net>; <elecraft at mailman.qth.net>
Sent: Thursday, March 02, 2006 3:53 PM
Subject: Re: [Elecraft] Remote control software


> OM,
>
> Elecraft has documented the CAT commands well.  I use MixW, and it can 
> control anything controllable on the K2.  I can set both the analog and 
> digital filters.  You can simulate a button push with CAT command, and 
> MixW lets you send <CATCMD:xxyy>  For example here's a CAT command for
> setting the mode and xtal filters to FL1 from any previous setting on the 
> K2: 
> <MODE:BPSK31><UNLOCKTX><CLEARWINDOW><CATCMD:K23;SW18;SW10;MD9;FW00001;FW00002;SW33;FW00001;>
>
> 73,  Chas W1CG
>
> At 03:59 PM 3/2/2006, G8IFF/KC8NHF wrote:
>>That probably means that Elecraft haven't documented CAT commands to do 
>>it.
>>
>>recarter at adelphia.net wrote:
>>>Paul
>>>   I poked around with Ham Radio Delux as much as I could, and I can't 
>>> seem to find any method of setting the filters (both XFIL and AFDSP) on 
>>> the K2.  I don't mean selecting, I mean setting.  This would mean filter 
>>> low freq and bandwidth, and various DSP constant settings.  There 
>>> doesn't appear to be any way to set most of the menu selections 
>>> including these filter settings.  If I am incorrect, please let me know.
>>>
>>>
>>
>>_______________________________________________
>>Elecraft mailing list
>>Post to: Elecraft at mailman.qth.net
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>>http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>