[Elecraft] K2/100SSB partial disassembly/assembly help

[Darwin, Keith]

P 40 & 41 of the K2 manual walks you through the process of hooking the
display & control boards together and to the main (RF) board.  Use that
as the final guide.

To get the display off, you'll have to take a few screws out and just
pull forward.  Make sure you remember to get the screw that holds the
control board to the display board.  If you have the DSP or AF, that may
have to be unplugged / unscrewed as well.

- Keith KD1E -
- K2 5411 - 

-----Original Message-----
From:  Mark

I just received a terrific pre-built K2/100/SSB unit.  It works
wonderfully, but it would appear that I need to get inside and "fiddle"
with the front panel jumpers to configure the microphone.