[Elecraft] first checks resist. kx1

[Don Wilhelm]

The '>1k' means that any resistance reading between 1k and infinity is
acceptable.  Readings below 1k are an indicator of a problem.

Similarly, '<50' means any resistance below 50 ohms are good, but anything
above 50 is not good.

Substitute other numbers for the '1k' and '50' as required.

You often find better results if you use a fixed range on your DMM rather
than using the auto-ranging.

73,
Don W3FPR

> -----Original Message-----
>
> The more than and less than are a bit confusing to me
> so can someone tell me if the following are within
> tolerence?
>
>