[Elecraft] KX1

[Ron]

Jack Regan wrote:
> My KX1 just came back from Don Wilhelm who installed the 30/80 module for me
> and along the way fixed my low power output problem.
>
> It was an improperly tinned/wound toroid!?%# Thanks Don.  Your as good as
> your reputation!!
>
> I got on the air right away and had a short QSO with Seattle WA.  I’m in SF.
>
> BTW, my KX1 is fully loaded (including the paddle).
>
> The antenna I used was a trapped dipole resonent at 7.140. I was calling on
> 7.040.  The KXAT1 did not make a very good match but I did call cq and got
> thru with a 229 report.
> Today I lengthened the dipole to give me a 1 to 1 SWR from 7.000 to 7.060.
>  It works fine and made contacts with Napa, CA., and AZ.
>
> The same day I got the rig back from Don. I got my #534 wire from the
> Wireman and I already have a Pomona 3296 so tommorrow I am going to start
> testing “random” length wires.  I’ll post the results of my test as well as
> the questions I have about the KX1/KAT1’s abilities to match dipoles and
> Yagis to the Antenna thread.
>
> This “short” note is just to let you know I am up, running and and happy.
>
> Jack Regan, AE6GC 
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>   
I will be interested in your results. My KX1 is still unbuilt. I will 
get there eventually!