[Elecraft] Resetting K2?

[Don Wilhelm]

Fred,

In a word, NO!!!
Do not do a reset - you will have to re-enter all the settings for
filters/BFOs, and any other parameters you have so carefully set into your
K2.

The firmware handles removal and replacement of options automatically with
the AUXBUS signalling, you do not have to do anything to make that happen.

While we are on the subject - if you have not done so, it is a good idea to
write down the settings for these parameters.  Download the A to B
instructions from the Elecraft website, and you will find it has a nice
chart where you can enter your filter settings an other menu items just in
case something happens along the way and you have to re-enter them.

73,
Don W3FPR


> -----Original Message-----
>
> I have to replace a questionalble KNB2 NB option,
> pcb card (populated).
>
> Is there someway the K2 (#5422) needs or can be
> RESET - to first know that, once I pull out existing
> KNB2 option card, it again doesn't have one - and
> then when I put new KNB2 populated card back in -
> it knows again a KNB2 exists?
>
> Wow - long winded, for "can I reset my K2?"   I'd
> like to clear the K2's throat, before I put another
> option card back in.  :>)
>
> Thanks,
> Fred N3CSY
> 6/27
>