[Elecraft] Proset

[Phillip Buckholdt]

   Hi;

I have a Heil Proset that I got from Elecraft. I hooked up according to spec 
sheet, jumpers on all pins on the header and 5.6k res pins 1 to6 on mic 
socket. This works fine if I key the K-2 with my straight key. I have a Heil 
foot switch I use with my IC-746 and Heil ICM. I ordered a new AD-1k adapter 
but that is'nt the problem. I have a Radio Shack mic that works fine ( # 1 
audio, # 2 ptt and 78 gnd).

Anyone have any ideas?

   Thanks Phil (# 5423)