[Elecraft] Moving the bands on k1 modules

[David Toepfer]

Because of the way the K1 4-band board is designed (2 bands share a set of
bandpass and lowpass filters (40/30 and 20/17) as opposed to the 2-band board
which can accept any two bands, since each has it's own set of filters) you can
not do as you describe.  You can't get much more out of it than what is
described on the elecraft site.

If you want 80/40/30/20 in one case you could get a KX1 + KXB3080, but those
are the only bands you can get in it.

dt
.


--- Krister Eriksson <sm5kri at ssa.se> wrote:

> Hi, 
> I have ordered one K1-4 plus KFL1-2, should soon arrive here in SM. 
> 
> I have choosen 40/30/20/17 mtrs in k1-4 and 80/15 on KFL1-2 board and
> will probably build this way, but i just wondering about doing this way:
> 80/40/30/20 K1-4 and 17/15 on KFL1-2, is that possible with the existing
> parts included in kit? 
> 
> By this way i will not need to swap boards when changing between 40 and
> 80 mtrs.. 
> 
> 73 / SM5KRI Chris
> -- 
> Krister Eriksson
> Ringduvegatan 23
> 724 70 V�ster�s
> 
> [Hamradio: SM5KRI]
> [ sm5kri at ssa.se ]
> 
> 
> -- 
> SM5KRI
> Krister Eriksson
> sm5kri at ssa.se
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>