[Elecraft] KX-1 KXBD1 KEYER ISSUE

[Don Wilhelm]

Ken,

The knurled handle screw supplied with the KXPD1 is what keeps the key
secured to the KX1 and should prevent 'wiggling'.  If it does not, look for
something projecting on the back of the paddle - you may not have tightened
the jack body adequately into the paddle base - the shoulder of the jack
should be flush with (or recessed slightly below) the aluminum block of the
paddle.

73,
Don W3FPR


> -----Original Message-----
>
> I must have done something wrong...   When I plug the kxbd1 in it wiggles
> too much..
>
> Should I have screwed the knerled nut on the key jack?  The jack
> on my kx-1
> is flush with the upper conver so the nut wont screw on.
> Suggestions to solve the case of the wiggling KXBD1
>
> thanks
>
> Ken K1UM
>