[Elecraft] K2 low power and HI current

[John Wiener]

The saga continues.
I am in the middle of building my very first breadboard project: a 10  
MHz oscillator to test the K2.  Got about half of the parts from  
Radio Shack.  Got the XTAL and a few other parts at Hosfelt Electronics.

For the Don,
I found two caps that were wrong in the bandpass area:
C12 was labelled 560 and should be 561 and
C4 was labelled 820 and should be 821

These appear to be order of magnitude differences so I HOPE their  
correction leads me on.

I remember correcting myself during the build : 560 is 561  ...  820  
is 821.

Can Someone (I don't know who...could it be DON?!) confirm that the  
above is correct and makes sense?

If so, I'll order more caps.

Thanks again for all the help
(and everyone's patience with what is becoming a record-breaking thread)

John
AB8WH