[Elecraft] K2/100 SSB ALC Problem(Revised)

[Tom Arntzen]

----- Original Message ----- 
From: "Ken K3IU" <kenk3iu at cox.net>
To: "'Don'" <ehrlich at olypen.com>; "'List Elecraft'" 
<Elecraft at mailman.qth.net>
Sent: Monday, July 31, 2006 7:16 PM
Subject: RE: [Elecraft] K2/100 SSB ALC Problem(Revised)


> Very interesting. I also seldom use SSB, but I did a test on 5413 and see
> the same thing. I have the K2/100 connected to a 50 ohm DL through a 
> Diamond
> SX-200 power meter. When I first turn the K2/100 "on" with the power 
> control

Hi!
I did have the same problem on my K2/100 a while ago.
It occures on 40,80 and possible 160 also.
The problem is easy to fix with alcmod on the KSB2.
Email Gary at support for next step.
Meanwhile placing the rig in vox or alcreading will cause the rig to stick 
to it's requested power.
You can still use PTT while in voxmode.
If by any means necessary Mail me off reflector and I can dig into my 
archive for component changes.
But I don't know if there has been any changes to the mod since I did them 
so I think there would be smart to check with Gary.

Good luck all

tom.arntzen(at)monet.no
LA1PHA