[Elecraft] Straight Key on my K2

[Darwin, Keith]

I think this is really the approach to use.  The K2 keyer is fine but an
external keyer can be in improvement.  Leave the ring in Hnd mode and
let the external keyer do the work.  Then hook your straight key, side
swiper and bug in parallel with the output of the keyer and away you go!

- Keith KD1E -
- K2 5411 - 

-----Original Message-----
Of course, the easy solution is to use an external keyer and connect the
hand key in parallel with its output - the K2 can be permanently set to
INP Hnd for that setup.

73,
Don W3FPR