[Elecraft] Rookie help cry : A or B PCB , version C or D , firmware 2.01 or 2.04 ?

[PE1E]

Yes Don,

This was most helpful and crystal clear.
On the basis of your appreciated explanations I made up my mind what to do.
This is a great reflector.

Thanks very much !
Peter, PE1E


----- Original Message -----
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: "PE1E" <PE1E at chello.nl>; "'Elecraft List Members'"
<elecraft at mailman.qth.net>
Sent: Saturday, July 29, 2006 6:41 PM
Subject: RE: [Elecraft] Rookie help cry : A or B PCB , version C or D
,firmware 2.01 or 2.04 ?


> Peter,
>
> Yes, there is a lot of information for anyone on revision levels.
> First let me say that any K2 will work great if properly constructed and
> aligned.  I would never say that the older ones are inferior to the newer,
> that is too strong a word.
>
> Any older K2 can be fully upgraded to the newest level at moderate cost,
and
> the changes are done without a large number of components added to the
> boards (it will still look very neat when completed).

snip ...( PvD )