[Elecraft] minimum RF power output level of K2

[johnny]

Hi Group,

Some of you have already given me some advice on this.  I have done some =
experiment.

The K2 (without K60XV) can give a stable RF power output above 0.5 watt. =
 For any setting between 0.1-0.5 by the Power knot, the output is not =
stable but will be something not exceeding 0.5 watt.

However, when I go to 'TRN' transverter setting in the SEC manual, when =
I set the maximum power at 0.1watt, the K2 can give a stable RF output =
lower than 0.5 watt.  Any turning of the Power knot will have no effect =
on the RF output.  I do not have an accurate RF power meter for anything =
lower than 5 watts.

Could any of you do a power measurement for me by setting the TRN OUT at =
0.1?

TNX & 73

Johnny Siu VR2XMC