[Elecraft] KXB3080 power questions

[David Toepfer]

> 3) How accurate is the DL-1?  Does it tend to read hi (optamistic) or lo
> (pessamistic)?

I asked this because the the KXAT1 reads higher than the calculation I get from
the DL-1.  The DL-1 matches the KXAT1 if I use the following calculation
(instead of the one supplied in the DL-1 manual):

P=(((E*sqrt(2))+0.75)^2)/50

Of course, this could be miscallibration of my volt meter.