[Elecraft] Transverter Configuration Problem

[Don Wilhelm]

Normally the TRN x OUT parameter can be adjusted from H to L by rotating the
VFO knob or tapping the BAND+/BAND- buttons.  When you get to the 'H 0.01'
display, rotate the VFO knob counterclockwise and you should see the H turn
to an L.

If that does not happen, check your firmware levels.

73,
Don W3FPR


> -----Original Message-----
>
> I am trying to configure my first transverter on my K2 - the
> XV-50, and am having some trouble with the secondary menu
> options.  I don't see how to switch the TRN x 'OUT' parameter
> from HI to LOW power mode ... it cycles through H 0.01 - H 12.7.
> No matter what I do, can't turn that darn 'H' into an 'L'!
>
> Any help would be appreciated.  Thanks in advance.
>