[Elecraft] BFO low freq too high -- a problem or not?

[Leigh L Klotz, Jr.]

Here is a point of experience for this situation: I operated FB like 
this, using the Rev F filter width.   Below 15m RTTY worked fine because 
of the default sideband placement, and on all bands in other modes it 
also worked fine.  I saw no other effects.  I fixed only when I decided 
I needed 15M RTTY mode for PSK.
Leigh/WA5ZNU
On Tue, 31 Jan 2006 10:31 am, Don Wilhelm wrote:
> Rob,
> It might be a problem with the alignment of the SSB filter, especially 
> if you choose to install the capacitors for the 2.6 kHz filter width.  
> It could
> also be a problem if you activate the RTTY filters