[Elecraft] Sidetone source

[Peter - PAøPJE]

Hi Don,

One's never to old to learn... I didn't know this and just cheked it. That 
must have been my problem as well, I think,  but I can't be sure of course. 
Maybe something to put in the Troubleshooting FAQ on the Elecraft website?

73,
Peter PA0PJE

----- Oorspronkelijk bericht ----- 
Van: "Don Wilhelm" <w3fpr at earthlink.net>
Aan: "Bill Coleman N2BC" <n2bc at stny.rr.com>; <elecraft at mailman.qth.net>
Verzonden: maandag 23 januari 2006 15:11
Onderwerp: RE: [Elecraft] Sidetone source


> Bill,
>
> The selectable sidetone source is for support of older K2s that have not 
> had
> the wiring change made for the new sidetone source.  It has been a source 
> of
> confusion many many times and IMHO should be eliminated in the next 
> firmware
> release (which would require those older K2s to apply the hardware change 
> if
> the firmware is upgraded).
>
> Bottom line, your K2 (like all post-SN3000 K2s) has only the U8 pin 4
> sidetone source built into it - and there is nothing missing.
>
> 73,
> Don W3FPR
>
: http://www.elecraft.com