[Elecraft] Tests right after first powerup

[PAøPJE]

Sure thing, Alex!

The attenuator switches in and out with a latching relay and the preamp too, 
so it's cycling one click > one click > two clicks almost simultaniously. Is 
there any effect noticeable while pressing the button?

73,
Peter
PA0PJE

----- Oorspronkelijk bericht ----- 
Van: "Alexandra Carter" <alexandracarter at sbcglobal.net>
Aan: <elecraft at mailman.qth.net>
Verzonden: maandag 23 januari 2006 13:33
Onderwerp: [Elecraft] Tests right after first powerup


> My K2 powered up like a champ, had the messages and start up freq exactly 
> as mentioned in the manual, and the relays click in the band change tests, 
> but I'm puzzled, the manual says the relays should also click when tapping 
> the PRE/ATT button and they don't on my K2. What am I doing wrong? 73 de 
> Alex NS6Y.
>
> PS - the RF probe is a pain in the butt to make, can I just use my 'scope?
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com