[Elecraft] BNC to UHF adapter

[David A. Belsley]

Keith:  At RS you can get a short length of RG58 with BNC connectors  
on both ends.  Then you can do one of two things.

a) get a BNC-female/PL-259 adapter (278-121) attached to an inline  
SO-239 coupler (278-1369) or
b) get an inline BNC-female coupler (278-115) attached to a BNC/ 
SO-239 adapter (278-120)

Either way you end up with a cable with a BNC connector at one end  
and an SO-239 on the other.


best wishes,

dave belsley, w1euy


On Jan 20, 2006, at 3:28 PM, Darwin, Keith wrote:

> I assume by UHF you're talking about the female version of PL-259
> (SO-239)?  That will put the weight of a PL-259 connector plus the
> adapter on the BNC panel jack on the rig.  I had though it would be
> better to hook up a piece of coax with just the BNC connector to  
> reduce
> the weight on the rig.
>
> - Keith -
>
> -----Original Message-----
>
> Keith,
> I simply use a BNC to UHF female adapter....works slick!
> 73
> Tony, W4FOA
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com