[Elecraft] replacement mike for md2 hm2

[Ed Findley]

Currently have the Heil proset K2 and the K2 wired for it with the 5.6k
resistor. Looking for a hand mike that will work with the existing K2 wiring
for the proset.  It seems that the handi mike HM-iC uses the same element as
the old MD-2, HM-2 and the proset K2.  If the Kenwood 8 pin  cable (CH-1K)
is used with it then it should work with the existing K2 wiring, I guess.
Any thoughts from those smarter than me?

 

Ed Findley  WB2KUI