[Elecraft] KRC2 users?

[Robert Tellefsen]

Hi Tom
My KRC2 is in constant use in my shack with my K2.
I have a homebuilt box that does antenna switching
and switches the antenna matching networks as well.
I use tuned feeders on all bands except 160, so each
band has to be matched separately.  The KRC2 controls
it all very well.

I've not needed the utility to reprogram anything, so
no info there.
Good luck and 73
Bob N6WG
The Little Station with Attitude

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Tom Althoff
Sent: Sunday, January 15, 2006 2:53 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KRC2 users?


I don't think I've seen any comments regarding the KRC2.

Ever since my K2/100 booted my Orion out of the shack I have been using my
Array Solutions "Rat Pak" auto-antenna-switch in manual mode.

The KRC2 would put me back in auto-antenna mode again.

If I connect the KRC2 to my K2 I assume I can control the K2 from PC
software transparantly from any software package that controls the K2 now.
Correct?

What would the disadvantage be if I wired the KRC2 for serial control (K2
and Kenwood) vs. Aux Bus mode (K2 only)?

Has the KRC2 config utility been released yet?

thanks!

Tom K2TA
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com