[Elecraft] XTAL FILTERS

[Don Wilhelm]

Perry,

One clarification - the BFO used for transmit is always the one associated
with FL1 for whatever mode you are set for - and on SSB the OPx filter is
in-line for transmit (to do its sideband 'stripping task'), so for proper
SSB operation, you must have the SSB FL1 set to OPx.  On CW, the transmit
signal does not pass through any of the filters, but the BFO frequency
setting for the FL1 CW filter determines the actual signal frequency.

73,
Don W3FPR

> -----Original Message-----
>  Thanks Don
> and  others  for the email
> on the filters   for ssb and  cw
>
>  Got it clear  now  as to how  it works
>
>  op1   is  SSB tx and rx
>
> any others (FL2 FL3 FL4)  are  for  receive on the
> main board,  and  the tx goes to the op1  for tx
>      Got it ..
>
>   Now that I have had the rig for a year or so. and
> installed the Dsp at Christmas time
> its  fun to go back over it and see just how it works
>
>  Very nice  radio
>
>   Next year  I  may ask Santa for the  100w  board
> (not that its needed , but to have something to build)
>
>
> Perry
> WA8THK
>
>
> > >
> > >
> >
> >
>
>
> PERRY   WA8THK  FP#582
> GAINES, MICHIGAN -USA
>    http://www.usol.com/~wa8thk/WA8THK.htm
>
>