[Elecraft] Adjustment of L34 on a K2

[Manuel Wilches]

Charlie:
I have done this 2 days ago and the same thing happened to me (I am still on 
part II).
L34 is on top of the can for the peak signal/noise.
I cannot give you any technical explanation for this but I am sure some of 
the guys on the Reflector will.
I will be liestening, that is for sure.
I have my "40 meters only" receiver on since yesterday and I am absolutely 
amazed with the receiver.
73
Manuel
LU5OM
CT4IK
# 5310


----- Original Message ----- 
From: "Charlie, W0YG" <w0yg at myawai.com>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Sunday, February 26, 2006 11:51 AM
Subject: [Elecraft] Adjustment of L34 on a K2


> On a K2, how critical is the adjustment of L34?  This is an adjustment 
> that peaks the IF amplifier.  The manual states a peak should be found one 
> turn of the slug down from the top however mine seams to be peaking right 
> at the top of the can.  Actually, I cannot go through the peak as it just 
> gets louder with the slug all the way at the top.
>
> The adjustment in question is on page 64 of the K2 manual, IF Amplifier 
> Alignment.
>
> I thought I would revisit this after completing alignment as I have done 
> 40M alignment on that same page as well as done the transmitter alignment.
>
> Just trying to peak and tweak to be sure everything is maxed out!
>
> 73,
>
> Charlie, W0YG..>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> __________ Información de NOD32 1.1418 (20060224) __________
>
> Este mensaje ha sido analizado con  NOD32 Antivirus System
> http://www.nod32.com
>
>