[Elecraft] CAL FIL

[Ron Polityka]

Hi Don,

 Yes, I just seen that in the manual as your e-mail came into my system. Now 
I have to locate my probe.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392


----- Original Message ----- 
From: "Don Brown" <DolfinDon at msn.com>
To: ".Elecraft" <elecraft at mailman.qth.net>; "Ron Polityka" 
<wb3aal at verizon.net>
Sent: Wednesday, February 22, 2006 8:38 PM
Subject: Re: [Elecraft] CAL FIL


> Hi
>
> Do you have the frequency counter probe connected to the BFO test point. 
> If you do, does the frequency counter work when you connect it to the 
> 4.000Mhz oscillator on the control board. If not then you have a problem 
> with the frequency counter on the control board. Possibly low gain on Q9 
> and Q10. If you just forgot to plug in the counter probe then that is your 
> problem.
>
> Don Brown
>
> KD5NDB
>
>
>
> ----- Original Message ----- 
> From: "Ron Polityka" <wb3aal at verizon.net>
> To: ".Elecraft" <elecraft at mailman.qth.net>
> Sent: Wednesday, February 22, 2006 7:12 PM
> Subject: [Elecraft] CAL FIL
>
>
>> Hello,
>>
>>  Hope someone can help me with a problem I am having trying to set my CAL
>> FIL settings.
>>
>> I am using the N0SS program and I have looked in my K2 manual and the one 
>> on
>> line. I have Processor 2.01H version and I/O Controller 1.02 version.
>>
>> I basic K2 for QRP operation without 60 meters.
>>
>> I can't seem to enter the new value of the CAL FIL that I want to keep. I
>> get a INFO 230 which is BFO is not connected to freq. counter.
>>
>> I know I am missing something but I just can't place my finger on it.
>>
>> When I go and set my FL1 and hit the XFIL button all 000000 come up and 
>> then
>> InFO 230 shows up.
>>
>> Any help would be grateful, thanks in advance.
>>
>> 72 and Thanks,
>> Ron Polityka
>> WB3AAL
>> www.wb3aal.com
>> www.n3epa.org/
>>
>> K1 - SN 01011
>> K2 - SN 01392
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>