[Elecraft] XV144 calibration

[mj at the-jensen-dk.net]

     Hi
     

     A question on the XV calibration.
     

     I  am  trying  to  align  the XV144 using K2 with XV60 to drive the
     transverter. It is the QRP K2.
     


     

     When  doing  the alignment, there are several times need to key the
     K2 at the same time to tune on the transvert     decided  to use the tune on K2<     TX until I press the key again. All tune     aligned.
     

     Now when I have connected a microphone to the K     USB  I  seem to drive the XV144 power in the r     turn down the power more then half to not have the red      XV144  on.  So when     K2  can  be  less  then  the  wanted power my the Power setting. Is
     somet     


     

     If  so  what signal should I then use to tune the XV144 cw or a USB
     wher     


     


     

     Thanks in advance
     


     

     OZ1BZJ
     

     Michael Jensen