[Elecraft] K2 - removal of Digital Filter board

[Stephanie Maks]

On the control board, jumper J1 pin 1 to J2 pin 1, and J1 pin 2 to J2  
pin 2.   Reference is on the control board schematic diagram

73 de Stephanie
va3uxb
K2#5311 - K1#2132


On 11-Feb-2006, at 16.37.02, JohnChanceRead at aol.com wrote:

> I am trying to tace a 2 x S point loss in my receiver.  I want to   
> remove the
> digital filter to remove that as a possibility.  What pins on  the  
> control
> board do I put the jumpers - I cannot find this in the  manual.  I  
> am off on
> holiday to Spain tomorrow and will take the  K2 with me so that I  
> can work on.
> Quick help appreciated
> John G4BOU
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com