[Elecraft] K2 Control board cap C37

[Don Wilhelm]

Bill,

Either will work just fine (the largest voltage on the Control Board is less
than 15 volts) - install the one that fits best physically.

73,
Don W3FPR

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of William Koucky
> Sent: Friday, December 29, 2006 7:02 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K2 Control board cap C37
>
>
> Guys,
>
> I am building like crazy and finished the control board but I was
> missing a
> 103 cap, C37.  I went to replace it at Radio Shack and they had
> two choices
> a .01mF polyester film cap rated at 50WVDC or a .01mF metalized-film at
> 400WVDC.  I bought both.  Which one should I install?
>
> As you can tell, I am not a radio wizard.
>
> Thanks,
>
> Bill Koucky
> Traverse City, MI
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.29/608 - Release Date:
> 12/29/2006 8:22 AM
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.29/608 - Release Date: 12/29/2006
8:22 AM