[Elecraft] K2: Hi Cur on 30m

[Mike Markowski]

Just to close this thread in case anyone was wondering about it, I 
installed the KPA100UPKT today and it solved the HI CUR on 30m problem. 
  The K2 now draws less than 1.7 A on 30m with 100 W tx into dummy load 
compared to 4.1 A before.  What a nice change.  My thanks to Don and the 
Elecraft Parts crew!

K1 #2298 was just finished this morning as well.  What will I do with 
all this extra time now?  Not sure I still remember how to operate the 
rigs.  :-)

73,
Mike  ab3ap

Don Wilhelm wrote:
> ...If the turns on the
> KPA00 low pass filter toriods are correct and all the C3x capacitors are
> correct, you may want to install the KPA100UPKT and see if that brings
> things under control...
> 
> 73,
> Don W3FPR
> 
>> -----Original Message-----
>>
>> I just noticed I'm getting a Hi Cur message only on 30m.
>> ...
>> Mike  ab3ap