[Elecraft] KPA100 Elimination?

[Joseph Reed]

Dave,

It really isn't necessary to change out L.  John, KI6WX also has a web site that outlines the process for remoting the KPA100/KAT100 and his conclusion was L1 didn't need to be changed.  After almost a year of operation not having changed L1, I have had no problems.

Joe N9JR

----- Original Message ----
From: Dave Van Wallaghen <w8fgu at comcast.net>
To: elecraft at mailman.qth.net
Sent: Wednesday, December 27, 2006 1:41:34 PM
Subject: RE: [Elecraft] KPA100 Elimination?


Happy Holidays to all:

In my case I chose to add a KIO2, KAT2 and KBT2 battery option to my basic
K2 and then placed my KPA100 with my KAT100 into the EC2 enclosure. My goal
was to enable me to unplug a few cables and take my K2 on the road or simply
plug it all back in and I'm QRO again. I found the process to be nice and
clean and seems to work very well. There is a mod to L1 on the AUXBUS board
to the KIO2 that should be performed as well.