[Elecraft] Freq Memory

[Dave & Jeanne Robertson]

Bernie,
On My K2 (#5779) if I change frequency on the same band and wait for 10 
seconds the K2 puts that new frequency in memory so when the rig is powered 
off , then back on it returns to the frequency it was last on.  If you 
change the frequency within the same band and quickly power the rig off, it 
will return to the original frequency before the change was made.

Example:

If the rig was at 3760 KHZ and I changed the frequency to 3770 KHZ and 
waited 10 seconds before shutting the rig down it will return to 3770 KHZ 
when powered up.

If you quickly powered off the rig after the Frequency change the rig will 
be at 3760 KHZ when powered up.

Hope that clears up your question.

73
Dave KD1NA