[Elecraft] K2 turn on frequency/band memory

[Dan Barker]

The band-switch will "remember" the current settings Right Now. Any change
of band causes the current band's settings to be memorized. If you need to
"speed up" the 30-second memory for some reason, a bandup/banddown will do
so.

Dan / WG4S / K2 #2456

<snip>
There is the '30 second rule' that you have to contend with.  The K2 waits
30 seconds after you have tuned to a new frequency, set a new mode, etc.
before it sets those parameters into memory.  So if you tune to a spot and
then quickly turn power off, it will not remember your settings.  Wait a
while (30 seconds seems like forever if you are in a hurry), and it will
behave just like the manual says.

73,
Don W3FPR
</snip>