[Elecraft] KPA100/KAT100 on 160 Hi Current

[John Reiser]

Hi Julius,

Both my K2/100s, #4970 and #5570 exhibit excessive current draw on 160 
meters, as indicated by the ammeter on my 30 watt Astron PS.  It gets up to 
27 or 28 amps.  I use a 30 amp fuse.  In every other respect, my two 
K2/100's work perfectly.  Current draw on all the other bands is less than 
20 amps.

I don't have an antenna for 160, so I never transmit on that band anyway, 
and this is not a big problem for me.  Still, being a bit of a 
perfectionist, it bothers me that it exists.

I mentioned it on the reflector a while ago.  Someone said they had the same 
experience, but had no solution.  Someone else suggested that I retune the 
80 meter bandpass filter to represent a compromise between 80 and 160.  I 
tried that, but the excessive current draw continued regardless of the 
bandpass tuning.  (Could it be due to the KPA100 going into oscillation at 
the 160 frequency?)

When I saw your post, I became hopeful that it might evoke a response from 
someone who had come up with the definitive solution.  But so far there 
hasn't been any.

Good luck and 73,

John, W2GW

----- Original Message ----- 
From: "J F" <phriendly1 at yahoo.com>
To: "Elecraft Discussion List" <elecraft at mailman.qth.net>
Sent: Wednesday, December 06, 2006 5:49 AM
Subject: [Elecraft] KPA100/KAT100 on 160 Hi Current


> Well ARRL 160 is history now.
>
> As usual, with the K2 I heard more than I could get to
> hear me ;o) Evidently I heard and worked more than
> some of the local contesters with "other" brand
> equipment heheh.
>
> Anyway I have a problem... I use the KPA100 with the
> KAT100, and there may be no connection between the
> two, to stretch the bandwith of my antenna. If I set
> the K2 for 100 watts (or just twist the knob far
> clockwise), the ALC does not kick in. In a key down
> situation, the current keeps climbing until the fuse
> blows. If I set it for 99 watts (I realize this is not
> that precise) the ALC does function somewhat. I've not
> tried it with a dummy load. The antenna was fairly
> well matched (1.2:1 at it best point)and has a current
> balun on it. So this really shouldn't be happening. Do
> I have a problem with the KPA?
>
> Thanks,
>
> Julius
> n2wn
>
>
>
> ____________________________________________________________________________________
> Yahoo! Music Unlimited
> Access over 1 million songs.
> http://music.yahoo.com/unlimited
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>