[Elecraft] Vox Defaulted to On at Turn On, Why?

[W7is at aol.com]

K2  VOX Defaults To ON at Turn ON --- Why ??  
I  was very disappointed to find that the K2 Vox/CW PTT defaults to the  ON 
state at Turn ON.   With Vox Turned On, when you turn  the rig on, it can 
very  
easily start pumping out full power you instant you turn  the rig On.    
By  that I mean if the CW key was operated or the circuit closer key on a key 
 
was  operated, when you turn on the K2, it can come up to full  output power. 
 
And that’s a  very bad thing.   It could get  you in a lot of trouble.    
Like what has  happened to me numerous times in the past several months.  
There are several ways the Vox could be handled  differently.   
    1.  Default Vox to come up OFF at turn On.  (my choice) 
    2.  Provide Menu Opt to decide if it comes up  ON or Off at Turn On.   
    3.  Retain Vox in Eprom memory -- comes up same way it was  @ Turn Off.  
I’ve  been using the K2 for several months and the Vox  defaulted to On at 
Turn On 
has already gotten me in trouble numerous  times.   What I do now -- is at  
Turn On,  
I  immediately hold the Vox button down till Vox shuts off.    Then when I 
want to  
output CW power, I turn  the Vox On.   
I  cant think of even one reason who you would want the rig to come up to 
full  power 
at Turn ON.    I’m not sure if Vox originates in the SSB fireware chip or 
not? 
It probably  does.   Is there room in  the 
SSB Firmware to upgrade it to Option B above?    
Am I missing  something? 
Is there something I just overlooked  something and there is a way to default 
it to OFF at turn on?   
Or another way to get it  working the way I want besides having to 
immediately  
turn the Vox off at turn  off,  probably after the rig came up putting out 
full power,  
a very bad thing.  
Frank W7Is