[Elecraft] Re: After CW transmit K2 receiver is muted.

[Arato Andras]

Hi,

On Mon, 21 Aug 2006, Arato Andras wrote:
> receiver is muted more often and often after CW transmit. A short key down 
> helps, but not always.
> 
> Transmitting with 100 W causes the problem more often than with QRP. Some 
> times Hi Reflected message appears while receiver is muted. The message 
> disappears if the short time transmit "solves" the problem. The phenomena 
> comes without KAT100 too.

I had no RF ground at my portable station. Can it cause the problem above?
Now I have a good ground and it seems working OK.

73! de Andras HA4AA.