[Elecraft] Help with K60XV

[John Wiener]

Hi everyone,

I've been working with Gary at Elecraft on a problem getting the  
K60XV to work.  Wanted to see if anybody had a similar experience or  
has advice.

I was getting a resistance reading between pins 13 and 14 of U1 on  
the K60XV at 99 ohms...it's supposed to be in the megohm range,  
apparently.
The reading was probably thru a cap (C12?) because it started at zero  
and slid up to 99 ohms.

When connected to the K2, I get the ol' "INFO 080".

After removing U1 from its socket, I still get 99 ohms between pins  
13 and 14.
I removed C12...still 99 ohms
I removed R1...now open.

Any ideas?

John
AB8O