[Elecraft] First K2 question

[Tom McCulloch]

Hi Bill,
  I won't presume to speak for the Elecraft guys, but they are very good and 
sending any parts that might be missing, and very quick about it too, I 
might add.  With that said, it would probably be best to only open the bags 
as you need them, to avoid mixing the parts up.  If a part is missing in a 
later bag, you can generally work around it (not always though), but even if 
you can't they'll have the part to you in a week at the outside.

If I remember correctly the resistors are taped together in the order they 
are installed (not sure about that, though).

Have fun and keep us posted (what's your serial number?)

Tom
WB2QDG
K2 #1103


----------------------------------------------

Teamwork is a lot of people doing what I say.


----- Original Message ----- 
From: "Bill Carpenter" <NZ0T at cox.net>
To: "elecraft list" <elecraft at mailman.qth.net>
Sent: Tuesday, August 15, 2006 10:21 PM
Subject: [Elecraft] First K2 question


>I just ordered mine and a question has already popped up in my fevered 
>brain.  Since the parts are arranged in different bags, one for each board, 
>does it make sense to inventory and separate parts for each board?  In 
>other words, inventory and separate the control board parts and then finish 
>the board.  Once done, then proceed to an inventory/separation/finish of 
>the front panel board and then so on.  It seems to me it would cut down on 
>clutter from parts that are not yet needed and create more usable space on 
>my workdesk.
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com