[Elecraft] Getting started on K2
David A. Belsley
belsley at bc.edu
Sun Aug 13 09:15:56 EDT 2006
Bill:
One thing to consider very seriously is to eschew the mic and
psk31 until you get past the 5 wpm hurdle and get your general class
license.
best wishes,
dave belsley, w1euy
On Aug 12, 2006, at 10:22 PM, Bill Smith wrote:
> Just got my K-2 S/N 04401 finished with MUCH help from Steve Banks
> K0PQ (2 broken transistors, 1 backward diode on SSB board, many
> cold solder joints, etc.) and Gary. I got my Tech 2 years ago, but
> hope to get past the 5 wpm hurdle with the help of the FISTS disk
> and about 1 week intense practice. I have limited funds, but need
> some equipment, having only used a 2 M HT.
> I need to get a few items:
> 1. Need a mic. What works best with the K-2?
> 2. What PSK31 equipement would work? The West Mountain Radio
> RigBlaster looks good, but is a little pricy. Is it worth the outlay?
> 3. Other equipement? I bought the Noise Gen and the Dummy Load
> from Elecraft, so I hope to have them put togehter soon (my
> electronics knowledge is very limited). I built a 68 ft dipole for
> $60.00. 40 DB better than the 35 foot wire I had strung on my
> ceiling!
> 4. Down the line: general coverage receiver: I have a Yeasu
> FRG-100. Sounds mediocre, no comparison with my K-2 as receiver.
> Is it the Yeasu, or is the K-2 that good?
> Options on my K-2 are K2IO, NB, ATU, SSB.
> I live in NE, but I am going to the Denver Hamfest on the 20th of
> August. Hope to learn some things there, and possibly pick up some
> items.
> Thanks for any and all recomendations!
> Bill Smith
> KC0TBO
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
-------------------------------------
david a. belsley
professor of economics
More information about the Elecraft
mailing list