[Elecraft] K60XV help

[John Wiener]

Hi,

I just installed the K60XV on K2 #5312.  I did not receive "INFO 080"  
when first turned on.  After changing D19 to yes on secondary menu, I  
could not find the band.  I removed the board and replaced it after  
determining that the pins were inserted correctly.  THEN, I got the  
evil "INFO 080" when turned back on.

If the K60XV board is unplugged (still connected to phono plugs), K2  
is normal.

I have checked the values of C12 and R1: both correct.  The notch on  
U1 is facing the relay.   There are no obvious solder problems.

Any and all help greatly appreciated.

John
AB8WH