[Elecraft] No power output K2 Part III of assembly Problem Solved

[W7is at aol.com]

Thanks very much for the helpful suggestions on how to solve the 
no power output in the final assembly Part  III.      W3FJP provided
a very detailed test procedure and a number of others provided  info
about how they solved similar problems.     The RF  probe showed low
output from the Buffer.   Using a magnifying lens I found  what
 appeared to be a tiny hint of a  pool of solder around   RFC13. 
After touching it  up,  all is well with full output  power.     I also 
found my  trusty  35 yrs old 2kw dummy load had a bad coax  fitting.  
 
Even though I was up half the night, it was worth the effort!!!  
 
Frank W7is