Re: [Elecraft] Elecraft GC receiver?

[Petr Ouředník]

Keith,

I am a bit surprised with Your 1kHz display resolution requirement > its not too much, no? K2 has 10Hz tuning resolution...

72, Petr OK1RP

>  ------------ Původní zpráva ------------
>  Od: Darwin, Keith <Keith.Darwin at goodrich.com>
>  Předmět: [Elecraft] Elecraft GC receiver?
>  Datum: 31.7.2006 21:25:08
>  ----------------------------------------
>  We all want a K2-B (K2 with big knobs & display) and I'm sure Elecraft
>  Engineering is working on it as we speak.
>   
>  So how about another idea.  I want a separate receiver in the shack.
>  Something to use as a backup.  Something I can use to monitor my the TX
>  signal from my K2 so I can hear what it is really doing.  Features would
>  include:
>   
>  - Medium size or larger controls.
>  - General coverage SW receive (1.5 - 30 MHz)
>  - 1 KHz display resolution.
>  - Low noise, great sound so you can really tell what your TX signal
>  sounds like.
>  - AM / SSB / CW coverage
>  - wide / medium / narrow filters
>  - Low cost ($300)
>   
>  Nice to have includes
>   
>  - Analog S-Meter.
>  - Memories
>  - IF shift
>  - External mute
>  - Fast / Slow / Off AGC speeds
>  - RF gain control
>  - Synchronous AGC
>   
>  I guess I'm looking for a modern Drake 2B / R-4B but with full coverage.
>   
>  - Keith KD1E -
>  - K2 5411 -
>  _______________________________________________
>  Elecraft mailing list
>  Post to: Elecraft at mailman.qth.net
>  You must be a subscriber to post to the list.
>  Subscriber Info (Addr. Change, sub, unsub etc.):
>   http://mailman.qth.net/mailman/listinfo/elecraft    
>  
>  Help: http://mailman.qth.net/subscribers.htm
>  Elecraft web page: http://www.elecraft.com
>  
>  
>  

Petr Ouředník
00420608230010 (private)
indians at seznam.cz
www.qsl.net/ok1rp