[Elecraft] K2 second RX etc.

[Bob G3PJT]

Yes that's right Don but in  my experience that's not been a hindrance. 
I will say that using a second RX with an inferior performance to the 
main K2 encouraged me to build the second K2 !!

73 Bob G3PJT

Don Wilhelm wrote:
> Bob and all,
>
> Just one observation since someone mentioned cross-band operation.  With
> this scheme, the Low Pass filters of 'K2T' are attached to the antenna, the
> 2nd receiver would ideally be tuned to a band lower in frequency than the
> transmitting K2 - tuning the 2nd receiver to a higher band will likely
> result in weak signals due to the Low Pass Filter.  Same band operation
> should be OK.
>
> 73,
> Don W3FPR
>
>   
>> -----Original Message-----
>>     
>
>   
>> Hi
>>
>> You can see my version at
>>
>> http://uk.geocities.com/g3pjt@btinternet.com/
>>
>> I am currently re engineering this set up to improve frequency swopping
>> etc. Stewart G3RXQ has a surface mount version of the diode switch which
>> is FAR superior to my discrete version.
>>
>> But works OK and as others have said very useful for spilt DXing.
>>
>> 73 Bob G3PJT
>>     
>
>
>
>   


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 268.4.4/319 - Release Date: 4/19/2006