[Elecraft] Re: KX1 still a bit low with 3080 and app note mod

[wayne burdick]

Randy,

If you're only getting 0.5 watts out on 80 m, it has nothing to do with 
the two added resistors, and changing their values won't make any 
difference. Most likely you have a toroid lead on the LPF1 module that 
isn't making contact, or the relay on the module isn't getting turned 
on when you switch to 80 meters.

73,
Wayne
N6KR

>
> Just finished doing the mod here. I have some good news and some bad 
> news....
>
> Good news is it seems to have helped on 40/30/20. They are now 3 to 4 
> watts out. Previously I was in the 2.5-3.0 range at best with just the 
> 30 m module in, and was never able to get it above that area.
>
> Bad news is the 80m won't go above 0.5 watts out.

> ---

http://www.elecraft.com