[Elecraft] Re: K2IO and BeaconSee --- problem solved

[wayne burdick]

On Apr 5, 2006, at 2:34 PM, Sverre Holm wrote:

> Evidentally the K2 does not like a KIO2 input command at the same time 
> as
> the PTT is keyed, but removing the PTT connection solved the problem.

Thanks for the update, Sverre.

Some commands are not allowed in transmit mode, as specified in detail 
in the KIO2 Programmer's manual. If such a command is detected, the K2 
will return "?", which is compatible with the industry-standard version 
of this ASCII protocol. (The K2 implements a superset.)

73,
Wayne
N6KR


---

http://www.elecraft.com