[Elecraft] KSB2 P1 Wiring Questions

[Don Wilhelm]

I just wonder why would a K2 owner want to spend good money for one of those
solely to jumper the mic lines.  There is a header to do the same thing on
the rear of the front panel.  Elecraft designed it so you can interface any
mic to the K2, but I still believe it is easier to re-wire the mic plug as
required.
73, Don W3FPR

> -----Original Message-----
>
> There is a new item from MFJ that people may find helpful when
> interfacing a
> mic to the K2. Its an MFJ-655 mic equalizer/conditioner/preamp that is
> supposed to interface any mic to just about any rig. It takes two
> types of
> mic connectors and the jumpering is done in the MFJ-655. You can use the
> standard setup with 2 pin jumper blocks in the K2 and not have to
> make any
> changes there. I don't have one but I think I will buy it soon.
> Read about
> it on the MFJ website.
>
>