[Elecraft] Building time for a KPA100
thom2 at att.net
thom2 at att.net
Fri Sep 30 16:20:00 EDT 2005
I'm giving some thought to building the KPA100 in the separate enclosure. Can someone give me an idea on how long it would take to build? I realize that this is very subjective, but I'd like to get a general idea, say relative to building a basic K2.
Thanks
Tom
WB2QDG
K2 1103
-------------- Original message ----------------------
From: "Craig Rairdin" <craigr at laridian.com>
> The KAT100 is a quick build and needs the I/O with the KPA100 for testing.
> Do the KPA100 first. Once that's done and tested the KAT100 will go quickly.
>
> Craig
> NZ0R
> K1 #1966
> K2/100 #4941
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig Miller
> Sent: Friday, September 30, 2005 7:04 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Build Order: KPA100 & KAT100-1 ?
>
>
> I presently have a K2 with KAT2 internal tuner. I do not have a KIO2
> installed. I've just purchased the 100 watt amp and external tuner. My
> question is which order I should build and test these two units: KAT100
> first but no way to communicate with it to test it, or KPA100 first with no
> way to use it except for a dummy load? If I build the tuner first is there a
> way to "tap in" to the K2 enough to get the required communication signals
> to check the tuner out?
> Any suggestions from the group?
> Thanks,
> Craig K3OOL
> K2 4790, KSB2 KAT2 KDSP2
> (KAT100, KPA100)
> (Does the xyl know this??)
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list