[Elecraft] Build Order: KPA100 & KAT100-1 ?

[Craig Rairdin]

The KAT100 is a quick build and needs the I/O with the KPA100 for testing.
Do the KPA100 first. Once that's done and tested the KAT100 will go quickly.

Craig
NZ0R
K1 #1966
K2/100 #4941

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig Miller
Sent: Friday, September 30, 2005 7:04 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Build Order: KPA100 & KAT100-1 ?


I presently have a K2 with KAT2 internal tuner. I do not have a KIO2
installed. I've just purchased the 100 watt amp and external tuner. My
question is which order I should build and test these two units: KAT100
first but no way to communicate with it to test it, or KPA100 first with no
way to use it except for a dummy load? If I build the tuner first is there a
way to "tap in" to the K2 enough to get the required communication signals
to check the tuner out?
 Any suggestions from the group?
Thanks,
Craig K3OOL
K2 4790, KSB2 KAT2 KDSP2
(KAT100, KPA100)
(Does the xyl know this??)
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com