[Elecraft] Tenna Dipper, part II...

Rob Locher rob at idiompress.com
Wed Sep 28 12:47:25 EDT 2005


There is also the KD1JV digital frequency counter kit that could be used  
to modify your Tenna Dipper, so that it has a digital LED for the  
frequency.

http://www.qsl.net/kd1jv/Ddial.HTM

I don't have either kit, yet.  Has anyone tried adding the KD1JV frequency  
counter kit to the Tenna Dipper?

73,
- Rob
KE7EAG
K2 #5004 (under construction)



On Tue, 27 Sep 2005 16:06:48 -0700, JEAN-FRANCOIS MENARD  
<jfmenard at mac.com> wrote:

> Now That I have finished my basic Tenna Dipper Kit. I need to put it in  
> an enclosure with a little bit bigger switches, buttons.... BUT, BUT...  
> one thing....
>
> In this kit, if you need to know the frequency that the Tenna Dipper is,  
> you could just listen to the CW tones, but you will not be able to know  
> too easely at which frequency you are..... very anoying... :-(
>
> Why do not make an external connector on the K2 that is link to the  
> frequency counter probe connector on the control panel. After you have  
> selected the CAL FCTR function, connecting the Tenna Dipper External  
> frequency test point to the K2... you will be able to use your K2 to  
> display the actual frequency of this little antenna anylizer.... and now  
> be able to use more easly the Tenna Dipper on many different frequencies  
> instead of using it always at a pre-defined frequency, because it is too  
> hard without proper external indication.
>
> What an idea ???!!!! Let me guess.... I will do it tomorrow !! I let you  
> know "by picture" as soon as possible.
>
> 73
>
> =============================================
> /¯\/¯\/¯\/¯\/¯\/¯\   JEAN-FRANCOIS MENARD
>   V  A  2  V  Y  Z       VA2VYZ at ARRL.NET
> \_/\_/\_/\_/\_/\_/
>
> Elecraft K2 #4130
> Elecraft KX1 #999
>
> http://homepage.mac.com/jfmenard
> =============================================
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>



-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/



More information about the Elecraft mailing list