[Elecraft] Tenna Dipper, part II...

[JEAN-FRANCOIS MENARD]

Now That I have finished my basic Tenna Dipper Kit. I need to put it  
in an enclosure with a little bit bigger switches, buttons.... BUT,  
BUT... one thing....

In this kit, if you need to know the frequency that the Tenna Dipper  
is, you could just listen to the CW tones, but you will not be able  
to know too easely at which frequency you are..... very anoying... :-(

Why do not make an external connector on the K2 that is link to the  
frequency counter probe connector on the control panel. After you  
have selected the CAL FCTR function, connecting the Tenna Dipper  
External frequency test point to the K2... you will be able to use  
your K2 to display the actual frequency of this little antenna  
anylizer.... and now be able to use more easly the Tenna Dipper on  
many different frequencies instead of using it always at a pre- 
defined frequency, because it is too hard without proper external  
indication.

What an idea ???!!!! Let me guess.... I will do it tomorrow !! I let  
you know "by picture" as soon as possible.

73

=============================================
/¯\/¯\/¯\/¯\/¯\/¯\   JEAN-FRANCOIS MENARD
  V  A  2  V  Y  Z       VA2VYZ at ARRL.NET
\_/\_/\_/\_/\_/\_/

Elecraft K2 #4130
Elecraft KX1 #999

http://homepage.mac.com/jfmenard
=============================================