[Elecraft] XV50 Transverter

[JEAN-FRANCOIS MENARD]

Many thanks !!!

Le 05-09-10 à 14:06, Don Brown a écrit :

> Hi
>
> The XV50 can be set up several ways. If you are using a K2 with the  
> 60 meter
> transverter option then the power control on the K2 will control  
> the output
> of the XV50. The XV 50 has a watt meter on the front panel and you  
> can just
> set it for 10 watts out. You could also set the internal gain so  
> the XV50
> will only output a maximum of 10 watts. There are several other  
> ways to do
> what you want with the internal jumper options in the XV50  
> depending on the
> radio you want to drive the XV50 with and the level of the drive.  
> This can
> be a 1 to 1 mw, 0 to 5 watts or a fixed 5 watt level.
>
> Don Brown
> KD5NDB
>
>
>
>
> ----- Original Message -----
> From: "JEAN-FRANCOIS MENARD" <jfmenard at mac.com>
> To: "Elecraft - Maling List Elecraft - Mailing List"
> <elecraft at mailman.qth.net>
> Sent: Saturday, September 10, 2005 12:34 PM
> Subject: [Elecraft] XV50 Transverter
>
>
> Hi,
>
> I'm looking at the XV50 transverter. I would like to use this
> transverter on 6m with an external amplifier that permit only 10W RF
> IN maximum. Will it be easy to make sure that the transverter in not
> giving more than 10W of drive to the amplifier.... Will the output
> power selected with the power knob on the K2 will show the real RF
> output on the transverter ?
>
> I'm not too familiar with transverter and how they work...
>
> For your info, my external amplifier if a Tokyo Hy-Power HL-100Bdx.
>
> Thank for your time.
>
>
> =============================================
> /¯\/¯\/¯\/¯\/¯\/¯\   JEAN-FRANCOIS MENARD
>   V  A  2  V  Y  Z
> \_/\_/\_/\_/\_/\_/
>
> Elecraft K2 #4130
> Elecraft KX1 #999
>
> http://homepage.mac.com/jfmenard
> =============================================
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>