[Elecraft] K2's 4 MHZ Master Oscillator.

[Bob Wehking]

I used Wayne Burdick's article to calibrate my K2. When I first tuned in WWV, the zero beat was at 9999.5. I adjusted c22 & measured TP1(VCO) & TP2(BFO) until the two test points matched. Now WWV zero beats at 10000.5 .

Should I have set my dial to 10000.00 & then adjusted C22?.

I have also checked my calibration with my ICOM 756Pro &it also shows that I am off 500HZ based on WWV & other signals on 20 meters.

Bob
WB8DDI
K2# 4998